网投十大信誉网站_网投十大信誉排名_网投平台哪个信誉更高

网投十大信誉网站
首页 > 浏览 >学院概况 >教师风采

李萌蘖

更新日期:2019-03-12

        科学与工程学院研究生导师简介

   

李萌蘖

   

   

教授

    

硕导、博导

出生年月

1964.05.23

最高学位

博士

电子邮箱

limengnie@163.com

研究方向

金属材料加工集成计算材料工程

教育背景

·        1990.9 – 1995.12, Ph.D. Materials Science and Engineering, Oregon Graduate Institute of Science & Technology, Portland, Oregon, USA

·        1984.9 – 1987.2 工学硕士,金属材料与热处理,北京航空材料研究所

·        1979.9 – 1984.6 工学学士,焊接,清华大学

在研项目

1.      “集成计算材料工程研究平台建设”,昆明理工大学平台建设项目,1,000万元,建设期:2017.122021.12.

2.      “热处理过程材料性能场预测及工艺优化”,科技部材料基因工程关键技术与支撑平台重点研发计划项目“基于材料基因工程的传统制备加工工艺优化原理与方法”,课题编号:2017YFB0701804443万元,执行期:2017.072021.6.

3.      SA508-4钢微观组织转变与性能研究”,反应堆燃料及材料重点实验室基金,基金编号:6142A0619030318万元,执行期:2019.11-2020.10.

4.      “轨道交通转向架铝合金轴箱体与焊丝材料基因工程研究”,云南省稀贵金属材料基因工程重大科技计划一期2020项目,课题编号:202002AB08001-4280万元,执行期:2020.01-2022.12.

5.      “昆明理工大学集成计算材料工程省创新团队”,云南省高层次科技人才及创新团队转项,100万元,执行期:2020.01-2022.12.

科研成果

近期完成科研项目:

1.      “锡铋铟合金扩散三元结制备表征与数据分析”,云南省稀贵金属材料基因工程重大计划一期2018项目,课题编号:2018ZE01080万元,2018.012019.12.

2.      “基于材料基因工程方法的7075高强度铝合金汽车支撑摆臂制造技术研究”,云南省稀贵金属材料基因工程重大科技计划项目,省拨经费:60万元,2018.012019.12.

3.      “高品质宽幅特厚不锈钢-低合金钢复合技术开发”,国家高技术研究发展计划(863计划)课题,课题编号:2013AA031302,国拨经费446万元,自筹经费1200万元,执行期:2013.01-2015.12

4.      “焊接模拟验证及全流程模拟软件测试及应用”,高档数控机床及基础制造装备科技重大专项(04专项)课题先进成形制造全流程建模与仿真创新平台,编号:2012ZX04012-011-05,国拨经费157.53万元,企业自筹经费500万元,执行期:2012.01-2015.12.

发表文章:

1.      X. Zhang, X. Song, L. Zhu and M. V. Li, “Measurement and Prediction of Residual Stresses in Heat Treated Large Forgings”, Proceedings of 5th International Conference on Thermal Process Modeling and Computer Simulation, June 2014, Orlando, FL, USA.

2.      X. Yao, L. Zhu, and M. V. Li, “A Fully Coupled Material Constitutive Model for Steel Quench Analysis,” International Journal of Microstructure and Materials Properties, vol. 5(6), 2010, pp. 501-523.

3.      J. A. Penso and M. V. Li, “Experiences with Controlled Deposition Welding and Fitness for Service in Coke Drums,” ASME Pressure Vessels Piping Division, Publication PVP 2009-77853, ASME, Prague, Czech Republic, 2009, 10P.

4.      4L. Zhu, S. Bachani, R. Nordstrom, M. V. Li, and J. Devletian, “Modeling and Analysis of a New Solidification Cracking Test,” Proceedings of 7th International Conference on Trends in Welding Research, May 16-20, 2005, Pine Mountain, GA.

5.      X. Yao, L. Zhu, and M. V. Li, “Finite Element Analysis of Residual Stress and Distortion in an Eccentric Ring Induced by Quenching,” Proceedings of 14th Congress of International Federation of Heat Treatment and Surface Engineering, October 25-28, 2004, Shanghai, China, pp. 746-751.

6.      M. V. Li and G. E. Totten, “Computational Modeling of Quenching and Distortion,” Proceedings of 4th International Conference on Quenching and Control of Distortion, Nov. 23-25, 2003, Beijing, China, pp. 81-86.

7.      M. V. Li and D. Kim, “Prediction of Microstructure Evolution and Hardness Distribution in the Weld Repair of Carbon Steel Pipeline,” Proceedings of International Welding/Joining Conference – Korea 2002 on Intelligent Technology in Welding and Joining for the 21st Century (in CD Rom), Oct. 28-30, 2002, Gyeongju, Korea.

8.      M. V. Li and L. Meekisho, “Prediction of Microstructure Evolution and Hardness Distribution in Water-Quenched Steel Components,” Proceedings of International Conference on Computational Engineering and Sciences, July 31 to August 2, 2002, Reno, Nevada.

9.      .B. H. Chang, M.V. Li, and Y. Zhou, “Comparative Study on Small-Scale and Large-Scale Resistance Spot Welding,” Science and Technology of Welding and Joining, vol. 6(5), 2001, pp. 273-280.

10.  .M. V. Li and M. Kimchi, “Modeling of Resistance Spot Welding of High-Strength Steel,” Proceedings of Sheet Metal Welding Conference IX Oct. 2000, Detroit, Michigan, USA, Paper 5-2.

11.  M. V. Li, M. Kimchi, and Z. Feng, “Analysis of Resistance Spot Welding High Strength Steels,” Proceedings of SEM Annual Conference on Theoretical, Experimental and Computational Mechanics, Cincinnati, Ohio, June 7-9, 1999, pp. 850-852

12.  J. Yang, W. E. Wood, J. Dehaven and M. Li, “Bainite Transformation Kinetics in High Strength Steels,” Proceedings of 18th Conference on Heat Treating, October 12-15, 1998, pp. 476-483.

13.  M. V. Li, P. Dong, and M. Kimchi, “Analysis of Microstructure Evolution and Residual Stress Development in Resistance Spot Welds of High Strength Steels,” Proceedings of International Sheet Metal Welding Conference VIII, Detroit, Michigan, October 13-16, 1998.

14.  M. V. Li, P. Dong and M. Kimchi, “Modeling and Analysis of Microstructure Development in Resistance Spot Welds of High Strength Steels,” Proceedings of International Body Engineering Conference and Exposition, Detroit, Michigan, Sept. 29 to Oct. 1, 1998, vol. 5, pp. 59-64.  (SAE Paper 982278).

15.  M. V. Li, P. Dong and M. Kimchi, “Computational Modeling of Heat Transfer and Microstructure Development in Resistance Spot Welds of HSLA Steels“. Proceedings of 5th International Conference on Trends in Welding Research, eds. J. M. Vitek, S. A. David, J. A. Johnson, H. B. Smartt, and T. DebRoy, June 1-5, 1998, Pin Mountain, TN, pp. 155-160.

16.  .M. V. Li, D. Niebuhr, L. Meekisho, and D. Atteridge, “A Computational Model for the Prediction of Steel Hardenability,” Metallurgical and Materials Transactions B, vol. 29B, no. 3. 1998, pp. 661-672.

17.  P. Dong, M. V. Li, and M. Kimchi, “Finite Element Analysis of Electrode Wear Mechanisms: Face Extrusion and Pitting Effects,” Science and Technology of Welding and Joining, vol. 3, no. 2, 1998, pp. 59-64.

18.  P. Dong, J. M. Zhang, and M. V. Li, “Computational Modeling of Weld Residual Stresses and Distortions – an Integrated Framework and Industrial Applications,” ASME Pressure Vessels Piping Division, Publication PVP, ASME, Fairfield, NJ, 1998, vol. 373, pp. 311-335.

19.  M. V. Li, P. Dong, and M. Kimchi, “A Contact Resistance Model for Resistance Spot Welding Processes: Theory and Implementation,” High-Productivity Joining Processes, Proceedings of ICAWT’97 International Conference on Advances in Welding Technology, Columbus, Ohio, Sept. 17-19, 1997, pp. 357-369.

20.  M. V. Li, L. Meekisho, and D. G. Atteridge, “Computational Modeling of Microstructure Evolution in Weld Heat Affected Zone of Low Alloy Steel,” Proceedings of 7th International Conference Computer Technology in Welding, ed. T. Siewert, July 8-11, 1997, San Francisco, CA, pp. 330-341.

21.  M. V. Li, P. Dong and M. Kimchi, “Finite Element Analysis of Resistance Spot Welding of Galvanized Steels,” Proceedings of 7th International Conference Computer Technology in Welding, ed. T. Siewert, July 8-11, 1997, San Francisco, CA, pp. 389-398.

22.  M. V. Li, P. Dong and M. Kimchi, “Modeling of Contact Resistance during Resistance Spot Welding,” Proceedings of 7th International Conference Computer Technology in Welding, ed. T. Siewert, July 8-11, 1997, San Francisco, CA, pp. 423-435.

23.  M. V. Li, D. Niebuhr, D. Atteridge, and L. Meekisho, “Computing Jominy Hardness Curves of Steels,” Proceedings of the International Symposium on Phase Transformations during the Thermal/Mechanical Processing of Steel – Honoring Professor Jack Kirkaldy, Vancouver, British Columbia, August 20-24, 1995, pp. 485-501.

24.  M. V. Li, D. G. Atteridge, and L. Meekisho, “Optimizing Electroslag Cladding with Finite Element Modeling,” Proceedings of 4th International Conference on Trends in Welding Research, eds. H. B. Smartt, J. A. Johnson, and S. A. David, June 5-8, 1995, Gatlinburg, TN, pp. 429-434.

25.  M. V. Li, D. G. Atteridge, and L. Meekisho, “Mathematical Modeling of Microstructure Evolution in the Heat Affected Zone of Electroslag Cladding,” Proceedings of 4th International Conference on Trends in Welding Research, eds. H. B. Smartt, J. A. Johnson, and S. A. David, June 5-8, 1995, Gatlinburg, TN, pp. 283-288.

26.  M. V. Li, Atteridge, G., Dikshit, V., and Meekisho, L, “Finite Element Analysis of Electroslag Cladding,” Proceedings of International Conference on Modeling and Control of Joining Processes, ed. T. Zacharia, Dec. 8-10, 1993, Orlando, FL, pp. 541-546.

27.  候玉年,郝俊明,李萌蘖.钛合金的摩擦焊接工艺研究[C].第四届全国电子工业焊接学术会议论文集, 1992, 234-236.

28.  李萌蘖,候玉年,张维琴,张琪. GH536镍基高温合金板材焊接性研究[J].航空材料学报, 1989, 9(2): 48-55.

29.  李萌蘖,候玉年.热模拟技术在研究焊接热裂纹方面的应用[J].航空材料学报, 1989, 9(3): 52-59.

 

上一篇:冯晶

下一篇:彭明军